Flyduino KISS FC & 24A ESC Flight Controller Combo
Package includes :
1x KISS FC v2
4x KISS 24A ESC
FC Specifications
STM32F722RET6 MCU, ARM-Cortex M7 with FPU running at 216Mhz
MPU6000 Gyro and ACC Sensor
Integrated DCDC converter for direct LiPo battery input (2-6S 6-30V) max 500mA on 5V
The first four ESC outputs are amplifyed to 5V Signal with very fast drivers (for a clear Dshot signal)
CP2102 USB-UART USB controller for simpler updates with the KISS Bootloader
MCU: STM32F722RET6 @216Mhz
Weight: 5g
Mounting Holes: 3x3cm pattern with 3.3mm holes (compatible with most frame types
Voltage: 2-6S (direct)
ESC Specifications
32-bit ARM Cortex MCU @ 48Mhz
Telemetry capability (current, voltage and speed / RPM will be covered by the ESC itself and to compatible devices such as our KISS FC forwarded)
Overcurrent protection (measures the current and limited active at 30A)
fast reacting overtemperature protection (reducing the gas when exceeding 120 ° C)
Advanced Auto Timing (3.25 to 30 ° are at each engine step readjusted)
For Race Multicopter Developed (24A continuous without direct cooling *)
High max. Speed ??(450.000ERpm, 64.000Rpm at a 14POL Motor)
Small dimensions (19 x 27 mm)
Fine speed control (about 950 steps)
No external ElKo (electrolytic capacitor) necessary
Fast reacting gas changes
Linear throttle response
Active freewheeling enabled (little diode losses resulting in higher efficiency)
regenerative braking, thereby rapid throttle response at Decelerate (the ESC uses active freewheeling and regenerative braking, 2 independent features which relates to each other in different working states)
Fast switching FET by the use of gate drivers
Minimal dead times by an adaptive dead time
2-5S LiPo capable
Oneshot42, Oneshot125 and normal (25 - 500Hz) PWM is detected automatically.
