Matek BetaFlight FC F405-OSD
Spec:
MCU: 168MHz STM32F405
IMU: 32K ICM20602 accelerometer/gyro (SPI)
Support 32K Gyro update & 16K PID Loop
OSD: BetaFlight OSD w/ AT7456E chip
Blackbox: MicroSD card slot (SD/SDHC)
VCP, UART1, UART2, UART3, UART4, UART5
Built in inverter for SBUS input (UART2-RX)
PPM/UART Shared: UART2-RX
Support SoftSerial on S5 & S6
Battery Voltage Sensor: 1:10
Currsnt Sensor: No (FCHUB-6S option)
BEC 5V & 10V: No (FCHUB-6S option)
LDO 3.3V: Max.300mA for Spektrum RX
WS2812 Led Strip : Yes
Beeper : Yes
RSSI: Yes
2x LEDs for FC STATUS (Blue, Red)
6x PWM / DShot outputs without conflict
5x UARTs
1x Group of G/S1/S2/S3/S4 pads for 4in1 ESC Sginal/GND
4x pairs of corner pads for ESC Signal/GND connections (DSHOT compatible)
1x Side-press button for BOOT(DFU) mode
1x 16pin bottom mounted FFC Slot for FCHUB-6S connection
36x36mm PCB with 30.5mm mounting holes
w/ 1x 0.5mm*16Pin 5cm Flexible Flat Cable
w/ 4pcs M3 Anti-vibration Standoffs
** Note **
For XSR/X4RSB user, please upgrade your RX to latest firmware version to enable PID tuning and Smartaudio VTX tuning. Should you have any question, please email us for help.
